Manufacturing

American Bridge fabricated 16 beams with cover, plates and studs and assorted cover plates and tie rods. Project Details Owner: Amtrak Location: New Rochelle, New York, United States Performed as:…

This project involved a 10-span truss bridge over the Ohio River in Pennsylvania and included the rehabilitation and/or replacement of stringers, sidewalk supports, downspout supports and numerous other miscellaneous repairs.…

Fabricated and painted 18 cantilever brackets with hardware, connection angles, continuity plates, fill and splice plates. Material, paint and drawings were supplied by contractor. Project Details Owner: New York State…

Fabricated 7,232SF of open grid deck for draw span. Project Details Owner: Florida Department of Transportation Location: Sarasota, Florida, United States Performed as: American Bridge Company Project value: $179,504.00 Completion…

Fabricated, primed and delivered 181 tons of structural steel for a new pedestrian bridge. Project Details Owner: City of Chicago Location: Chicago, Illinois, United States Performed as: American Bridge Company…

Simple truss span with elevated multi span approach Ramp over the Conemaugh River Project Details Owner: Pennsylvania Department of Transportation Location: Johnstown, Pennsylvania, United States Performed as: American Bridge Company…

Repaired existing arch spans and replaced roadway and sidewalk support steel on this multiple arch span bridge with two approach spans. Project Details Owner: County of Allegheny Department of Public…

Under contract with joint venture Kiewit/Tully, American Bridge fabricated this 300’ (91.5m) by 85’ (26m) by 52.5’ (16m) high, four-lane, swing-span through truss, plus two approach girder spans and 20,000SF…

American Bridge Manufacturing fabricated, delivered and supplied a total of 316 tons of structural steel for new two 3-span continuous composite steel plate girder bridges in Kylertown, PA crossing SR…

This project involved the fabrication and delivery of six temporary towers and seven sections of truss that were required for support of the main bridge sections during erection in order…